48W fast charging, two ports | PD 30W & QC3.0 18W
Delivers up to 48W total and charges two compatible devices at once. USB-C PD 30W and USB-A QC3.0 18W support fast charging of compatible Apple and Android smartphones as well as tablets. Multiple protection against overvoltage, overcurrent, overheating and short circuit keeps charging reliable in the car.
B button for the BASS mode
Press the B button to switch the BASS mode on or off. The reinforced low-frequency output produces a stronger, deeper sound, while built-in noise reduction cuts irritating FM background hiss.
Zinc-alloy head with rotary knob
The head housing is made of zinc alloy for heat resistance, scratch resistance and good heat dissipation; the plug shaft is made of sturdy ABS. The rotary knob on top lets you control FM frequency, volume, track changes and the LED light ring conveniently with one hand.
Bluetooth 5.3 | hands-free and voice assistant
Bluetooth 5.3 enables fast pairing and automatic reconnection. CVC noise reduction filters out road and wind noise for clearer conversations. With one button press you can answer, reject or end calls, redial the last number and activate Siri or Google Assistant for navigation, calls and music.
Broad 12V-24V vehicle compatibility
Suitable for cars, SUVs, vans and trucks with a 12V-24V cigarette lighter. The full FM range from 87.5 to 108 MHz makes it easy to find a free frequency with less interference.
Technical details
- Model: GV-FMT-48K
- Brand: GizmoVine
- Category: Bluetooth FM Transmitters
More from the GizmoVine range
- GizmoVine Bluetooth FM Transmitter with Clip Mount, QC3.0 and PD Charging
- GizmoVine Bluetooth FM Transmitter with 4.5 cm Colour Display and QC3.0
- GizmoVine Bluetooth 5.3 FM Transmitter, 42W PD 30W Car Charger with BASS
Common questions about the GizmoVine GV-FMT-48K
The questions buyers ask most before fitting a Bluetooth FM transmitter to a car that has none.
Will it work if my car has no Bluetooth at all?
Yes — that is exactly what it is for. The transmitter plugs into the 12 V socket and sends the audio to your existing car radio over FM. Your phone pairs with the transmitter rather than with the car, so no factory Bluetooth, no adaptor loom and no trip to a workshop are needed.
How do I pick an FM frequency?
Any free frequency between 87.5 and 108.0 MHz. Tune the transmitter and the car radio to the same one and leave some distance from strong local stations. A quick scan on the radio will show you which parts of the band are empty where you drive.
Can I charge a phone and play music at the same time?
Yes. Charging runs independently of the audio link, so the USB ports stay free for a phone or tablet while music is playing.
Does it handle hands-free calls?
Yes. A built-in microphone routes calls through the car speakers, and CVC noise reduction filters out background noise.
Will the sound match a wired connection?
It is close, but not identical. Quality depends mainly on how clear the frequency you choose is — picking an empty part of the band is the single biggest improvement you can make.
Does it suit a 24 V van or commercial vehicle?
Yes. The unit is rated for both 12 V and 24 V sockets.
What buyers say: GizmoVine GV-FMT-48K
A summary of the feedback buyers left on Amazon.co.uk for this product.
- Sound quality is described as crisp, with several buyers noting no static compared with transmitters they had used before.
- The rotary volume knob is called satisfying and easier to use while driving than button-only designs.
- Buyers with older cars report it solving the problem where replacing the head unit would have cost far more.
- A recurring four-star note: in a vertically mounted 12 V socket the buttons end up underneath the unit.
This summary was written by GizmoVine from publicly available customer reviews on Amazon.co.uk. Only a selection of four- and five-star reviews has been summarised; the complete review set, including critical reviews, is available on the Amazon product page. No review has been altered in meaning.
Reviews
There are no reviews yet.